Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 250

25
FW-1298
Recommended
No action is required.
Action
Severity
INFO
FW-1298
Message
<timestamp>, [FW-1298], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
Probable Indicates that the number of telnet violations has risen above the high boundary. Telnet violations
Cause
indicate that a telnet connection request has been received from an unauthorized IP address. The
TELNET_POLICY contains a list of TCP/IP addresses that are authorized to establish telnet
connections to switches in the fabric. The IP addresses use standard "dot" notation (for example,
255.255.255.255).
Recommended Run the errShow command to determine the IP address that sent the request. Responses to security-
Action
class messages depend on user policies. Consult your security administrator for response strategies and
policies.
Severity
WARNING
FW-1299
Message
<timestamp>, [FW-1299], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Indicates that the number of telnet violations has changed from a value outside of the acceptable range
Cause
to a value within the acceptable range. Telnet violations indicate that a telnet connection request has
been received from an unauthorized IP address. The TELNET_POLICY contains a list of TCP/IP
addresses that are authorized to establish telnet connections to switches in the fabric. The IP addresses
use standard "dot" notation (for example, 255.255.255.255).
Recommended
No action is required.
Action
Severity
INFO
25-44 Fabric OS Message Reference
Publication Number: 53-1000242-01