Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 432

58
SEC-1156
Recommended
Reduce the size of the specified policy database.
Action
Severity
INFO
SEC-1156
Message
<timestamp>, [SEC-1156], <sequence-number>,, INFO, <system-name>,
Change failed: <Reason> <defined status> <active status>.
Probable
Indicates that the security daemon is busy. The status values can be either defined, active, or both. A
Cause negative value means that a policy set was failed by the daemon.
Recommended
For the first reject, wait a few minutes and then resubmit the transaction. Fabric-wide commands might
Action take a few minutes to propagate throughout the fabric. Make sure to wait a few minutes between
executing commands so that your commands do not overlap in the fabric.
Severity INFO
SEC-1157
Message
<timestamp>, [SEC-1157], <sequence-number>,, INFO, <system-name>,
PID Change failed: <Reason> <defined status> <active status>.
Probable Indicates that the provisioning resources for a security policy failed due to low memory or internal error.
Cause
The status values can be either defined, active, or both. A negative value means that a policy set was
failed by the daemon.
Recommended
Retry the failed command.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity INFO
SEC-1158
Message
<timestamp>, [SEC-1158], <sequence-number>,, INFO, <system-name>,
Invalid name <Policy or Switch name>.
Probable Indicates that the specified name is invalid. The name can be a policy name or a switch name.
Cause
58-38 Fabric OS Message Reference
Publication Number: 53-1000242-01