Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 208

25
FW-1003
FW-1003
Message
<timestamp>, [FW-1003], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
Probable
Indicates that the internal temperature of the switch has risen above the high boundary to a value that
Cause
might damage the switch.
Recommended
This message generally appears when a fan fails. If so, a fan-failure message accompanies this message.
Action Replace the fan FRU.
Severity
WARNING
FW-1004
Message
<timestamp>, [FW-1004], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Indicates that the internal temperature of the switch has changed from a value outside of the acceptable
Cause
range to a value within the acceptable range.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation. If you receive a temperature-related message, check for an accompanying fan-related
message and check fan performance. If all fans are functioning normally, check the climate control in
your lab.
Severity INFO
FW-1005
Message
<timestamp>, [FW-1005], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable
Indicates that the speed of the fan has changed. Fan problems typically contribute to temperature
Cause problems.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation. Consistently abnormal fan speeds generally indicate that the fan is malfunctioning.
Severity
INFO
25-2 Fabric OS Message Reference
Publication Number: 53-1000242-01