Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 141

FABR System Messages
FABR-1001
Message
<timestamp>, [FABR-1001], <sequence-number>,, WARNING, <system-
name>, port <port number>, <segmentation reason>
Probable
Indicates that the specified switch port is isolated because of a segmentation due to mismatched
Cause
configuration parameters.
Recommended
Based on the segmentation reason displayed within the message, look for a possible mismatch of
Action relevant configuration parameters in the switches at both ends of the link.
Run the configure command to modify the appropriate switch parameters on both the local and remote
switch.
Severity WARNING
FABR-1002
Message
<timestamp>, [FABR-1002], <sequence-number>,, WARNING, <system-
name>, fabGaid: no free multicast alias IDs
Probable Indicates that the fabric does not have any available multicast alias IDs to assign to the alias server.
Cause
Recommended Verify alias IDs using the fabricShow command on the principal switch.
Action
Severity
WARNING
Fabric OS Message Reference
Publication Number: 53-1000242-01
Chapter
11
11-1