Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 449

Brocade fabric os message reference guide (53-1000242-01, november 2006)
Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:
Table of Contents

Advertisement

SEC-1305
Message
<timestamp>, [SEC-1305], <sequence-number>,, INFO, <system-name>,
This switch has no zoning license.
Probable
Indicates that there has been a corruption during the distribution of the security database. This can only
Cause
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity
INFO
SEC-1306
Message
<timestamp>, [SEC-1306], <sequence-number>,, INFO, <system-name>,
Failed to verify certificate with root CA.
Probable
Indicates that the certificate could not be verified with root certificate authority (CA). This could
Cause
happen if an unauthorized switch tries to access the fabric that is not certified by a trusted root CA or a
root CA certificate does not exist on the switch.
Recommended
Run the pkiShow command and verify that all PKI objects exist on the switch. If a failure to validate
Action
PKI objects occurs, follow the steps for re-creating PKI objects outlined in the Secure Fabric OS
Administrator's Guide. If PKI objects are valid, verify that an unauthorized switch is not trying to access
the fabric.
Severity
INFO
SEC-1307
Message
<timestamp>, [SEC-1307], <sequence-number>,, INFO, <system-name>,
Got response from Radius server <Radius server identity>.
Probable
Indicates that after some servers timed out, the specified RADIUS server responded to a switch request.
Cause
Recommended
If the message appears frequently, move the responding server to the top of the RADIUS server
Action
configuration list using the aaaConfig command.
Severity
INFO
Fabric OS Message Reference
Publication Number: 53-1000242-01
58
SEC-1305
58-55

Advertisement

Table of Contents
loading

Table of Contents