Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 409

Probable
Indicates that there has been a corruption during the distribution of the security database. This can only
Cause
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity
ERROR
SEC-1059
Message
<timestamp>, [SEC-1059], <sequence-number>,, ERROR, <system-name>,
Fail to <operation, e.g., save, delete, etc.,> <named item> to
flash.
Probable
Indicates that the operation failed when writing to flash.
Cause
Recommended Run the saveCore command to FTP files from the switch and remove them from the flash.
Action
Severity ERROR
SEC-1062
Message
<timestamp>, [SEC-1062], <sequence-number>,, ERROR, <system-name>,
Invalid number of Domains in Domain List.
Probable Indicates either that no domains or domains more than the maximum number supported are specified.
Cause
Recommended Enter the correct number of domains.
Action
Severity
ERROR
SEC-1063
Message
<timestamp>, [SEC-1063], <sequence-number>,, ERROR, <system-name>,
Failed to reset statistics.
Fabric OS Message Reference
Publication Number: 53-1000242-01
58
SEC-1059
58-15