Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 315

HLO System Messages
HLO-1001
Message
<timestamp>, [HLO-1001], <sequence-number>, FFDC, ERROR, <system-
name>, Incompatible Inactivity timeout <dead timeout> from port
<port number>, correct value <value>
Probable
Indicates that the HLO message was incompatible with the value specified in the FSPF protocol. The
Cause Brocade switch will not accept FSPF frames from the remote switch.
In the Fabric OS, the HLO dead timeout value is not configurable, so this error can only occur when the
Brocade switch is connected to a switch from another manufacturer.
Recommended
The dead timeout value of the remote switch must be compatible with the value specified in the FSPF
Action
protocol. Refer to documentation of the other manufacturer's switch to change this value.
Severity
ERROR
HLO-1002
Message
<timestamp>, [HLO-1002], <sequence-number>, FFDC, ERROR, <system-
name>, Incompatible Hello timeout <HLO timeout> from port <port
number>, correct value <correct value>
Probable Indicates that the HLO message was incompatible with the value specified in the FSPF protocol. The
Cause Brocade switch will not accept FSPF frames from the remote switch.
In the Fabric OS, the HLO timeout value is not configurable, so this error can only occur when the
Brocade switch is connected to a switch from another manufacturer.
Recommended
The HLO timeout value of the remote switch must be compatible with the value specified in the FSPF
Action
protocol. Refer to documentation of the other manufacturer's switch to change this value.
Severity
ERROR
Fabric OS Message Reference
Publication Number: 53-1000242-01
Chapter
29
29-1