Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 379

PSWP System Messages
PSWP-1001
Message
<timestamp>, [PSWP-1001], <sequence-number>,, INFO, <system-name>,
Areas for port <wwn name corresponding to source port> and port <wwn
name corresponding to destination port> are swapped. New area for
port <wwn name corresponding to source port> is <wwn name
corresponding to destination port> and port <new area corresponding
to source wwn> is <new area corresponding to destination wwn>
Probable Indicates that the portSwap command has been issued.
Cause
Recommended No action is required.
Action
Severity INFO
PSWP-1002
Message
<timestamp>, [PSWP-1002], <sequence-number>,, INFO, <system-name>,
Port Swap feature enabled
Probable Indicates that the portSwap feature has been enabled in the switch.
Cause
Recommended
No action is required.
Action
Severity
INFO
Fabric OS Message Reference
Publication Number: 53-1000242-01
Chapter
52
52-1