Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 285

Probable
Indicates that the switch status is not in a healthy state. This occurred because the power supplies are not
Cause
in the correct slots for redundancy.
Recommended
Rearrange the power supplies so that one is in an odd slot and other in an even slot to make them
Action redundant.
Severity
WARNING
FW-1430
Message
<timestamp>, [FW-1430], <sequence-number>,, WARNING, <system-name>,
Switch status change contributing factor Temperature sensor:
<Number Bad> bad.
Probable
Indicates that the switch status is not in a healthy state. This occurred because the number of faulty
Cause
temperature sensors is greater than or equal to the policy set by the switchStatusPolicySet command. A
temperature sensor is faulty when the sensor value is not in the acceptable range or is faulty.
Recommended Replace the FRU with the faulty temperature sensor.
Action
Severity WARNING
FW-1431
Message
<timestamp>, [FW-1431], <sequence-number>,, WARNING, <system-name>,
Switch status change contributing factor Fan: <Number Bad> bad.
Probable Indicates that the switch status is not in a healthy state. This occurred because the number of faulty fans
Cause
is greater than or equal to the policy set by the switchStatusPolicySet command. A fan is faulty when
sensor value is not in the acceptable range or is faulty.
Recommended
Replace the faulty or deteriorating fan FRUs.
Action
Severity WARNING
FW-1432
Message
<timestamp>, [FW-1432], <sequence-number>,, WARNING, <system-name>,
Switch status change contributing factor WWN: <Number Bad> bad.
Probable Indicates that the switch status is not in a healthy state. This occurred because the number of faulty
Cause
WWN cards is greater than or equal to the policy set by the switchStatusPolicySet command.
Fabric OS Message Reference
Publication Number: 53-1000242-01
25
FW-1430
25-79