Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 458

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

Retry changing the SNMP community strings from the primary switch.

<timestamp>, [SNMP-1004], <sequence-number>, FFDC, ERROR, <system-

name>, Incorrect SNMP configuration.

Indicates that the SNMP configuration is incorrect and the SNMP service will not work correctly.

Change the SNMP configuration back to the default.

<timestamp>, [SNMP-1005], <sequence-number>, AUDIT, INFO, <system-

name>, SNMP configuration attribute, <Changed attribute>, has

changed from <Old Value> to <New Value>

Indicates that the SNMP configuration has changed.

Use the snmpConfig --show command to see the new configuration.

<timestamp>, [SNMP-1006], <sequence-number>, AUDIT, INFO, <system-

name>, <SNMP Configuration group> configuration was reset to

Indicates that the SNMP configuration group was reset to the factory default.

Use the snmpConfig --show for the group to see the new configuration.

Fabric OS Message Reference

Publication Number: 53-1000242-01