Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 234

25
FW-1174
Probable
Indicates that the number of protocol errors that the port experiences has fallen below the low boundary.
Cause
Occasional protocol errors occur due to software glitches. Persistent protocol errors occur due to
hardware problems. A low number of protocol errors means that the switch is functioning normally.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Severity INFO
FW-1174
Message
<timestamp>, [FW-1174], <sequence-number>,, WARNING, <system-name>,
<Port Name>, <Label>, is above high boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of protocol errors that the port experiences has risen above the high boundary.
Cause
Occasional protocol errors occur due to software glitches. Persistent protocol errors occur due to
hardware problems.
Recommended Check both ends of your connection. Verify that your cable and SFP are not faulty.
Action
Severity WARNING
FW-1175
Message
<timestamp>, [FW-1175], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is between high and low boundaries(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of protocol errors that the port experiences has changed from a value outside
Cause of the acceptable range to a value within the acceptable range. Occasional protocol errors occur due to
software glitches. Persistent protocol errors occur due to hardware problems.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Severity INFO
25-28 Fabric OS Message Reference
Publication Number: 53-1000242-01