Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 91

AUTH-1038
Message
<timestamp>, [AUTH-1038], <sequence-number>,, ERROR, <system-name>,
Failed to retrieve certificate during <authentication phase>: port
<port number>
Probable
Indicates that the PKI certificate is not installed properly.
Cause
Recommended
Reinstall the PKI certificate, using the pkiCreate command.
Action
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and
switchEnable commands.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
Fabric OS Message Reference
Publication Number: 53-1000242-01
2
AUTH-1038
2-13