Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 267

FW-1342
Message
<timestamp>, [FW-1342], <sequence-number>,, WARNING, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of login violations has risen above the high boundary. Login violations
Cause
indicate that a login failure has been detected.
Recommended
Run the errShow command to determine the IP location of the login attempt. Responses to security-
Action class messages depend on user policies. Consult your security administrator for response strategies and
policies.
Severity WARNING
FW-1343
Message
<timestamp>, [FW-1343], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of login violations has changed from a value outside of the acceptable range
Cause
to a value within the acceptable range. Login violations indicate that a login failure has been detected.
Recommended
No action is required.
Action
Severity
INFO
FW-1344
Message
<timestamp>, [FW-1344], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Indicates that the number of invalid timestamps has changed. Invalid-timestamp violations indicate that
Cause
a packet with an invalid timestamp has been received from the primary FCS. When the primary fabric
configuration server (FCS) downloads a new configuration to other switches in the fabric, the packet is
tagged with a timestamp. The receiving switch compares this timestamp to its current time. If the
difference is too great, it rejects the packet. This counter keeps track of packets rejected due to invalid
timestamps.
Fabric OS Message Reference
Publication Number: 53-1000242-01
25
FW-1342
25-61