Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 94

3
BL-1003
Probable
Indicates that the blade initiation failed because one or more of the internal ports was not online. The
Cause
blade is faulted.
Recommended
Make sure that the blade is seated correctly. If the blade is seated correctly, reboot or power cycle the
Action blade.
Run the systemVerification command to verify that the blade does not have hardware problems. Refer
to the Fabric OS Command Reference for more information on this command.
Additional blade fault messages precede and follow this error, providing more information. See other
error messages for recommended action.
If the message persists, replace the blade.
Severity
CRITICAL
BL-1003
Message
<timestamp>, [BL-1003], <sequence-number>, FFDC, CRITICAL, <system-
name>, Faulting blade in slot <slot number>
Probable Indicates a faulty blade in the specified slot number.
Cause
Recommended Make sure that the blade is seated correctly. If the blade is seated correctly, reboot or power cycle the
Action
blade.
Run the systemVerification command to verify that blade does not have hardware problems. Refer to
the Fabric OS Command Reference for more information on this command.
If the message persists, replace the blade.
Severity
CRITICAL
BL-1004
Message
<timestamp>, [BL-1004], <sequence-number>, FFDC, CRITICAL, <system-
name>, Suppressing blade fault in slot <slot number>
Probable
Indicates that the specified blade experienced a failure but was not faulted due to a user setting.
Cause
Recommended Reboot or power cycle the blade, using the slotPowerOff and slotPowerOn commands.
Action
Run the systemVerification command to verify that the blade does not have hardware problems. Refer
to the Fabric OS Command Reference for more information on this command.
If the message persists, replace the blade.
Severity CRITICAL
3-2 Fabric OS Message Reference
Publication Number: 53-1000242-01