Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 503

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

ZONE System Messages

<timestamp>, [ZONE-1002], <sequence-number>,, WARNING, <system-

name>, WWN zoneTypeCheck or zoneGroupCheck warning(<warning

string>) at port(<port number>)

Indicates that a zone filter or zone group check failure occurred. The frame filter logic reported a failure

when creating or adding zone groups during PLOGI trap processing. This messages usually indicates

problems when adding CAM entries before the filter setup.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

<timestamp>, [ZONE-1003], <sequence-number>,, WARNING, <system-

name>, zone(<current zone>) contains (<domain id>, <port number>)

which does not exist.

Indicates that the port zone member that is targeted for the local switch contains a non-existent port. The

effective zoning configuration (displayed in the error message) contains a port number that is out of

Edit the zone database and change the port number to a viable value in the effective configuration.

Fabric OS Message Reference

Publication Number: 53-1000242-01