Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 200

22
FSPF-1005
Probable
Indicates that the specified remote domain ID is out of range.
Cause
Recommended
No action is required; the frame is discarded.
Action
Severity
ERROR
FSPF-1005
Message
<timestamp>, [FSPF-1005], <sequence-number>,, ERROR, <system-name>,
Wrong Section Id <section number>, should be <section number>,
input port = <port number>
Probable Indicates that an incorrect section ID was reported from the specified input port. The section ID is used
Cause
to identify a set of switches that share an identical topology database. The section ID is implemented
inside the protocol. The error message itself will indicate the mismatched section ID. It should be set to
0 for a nonhierarchical fabric. SilkWorm switches support only section ID 0.
Recommended Use a frame analyzer to verify that the reported section ID is 0. Any connected (other manufacturer)
Action switch with a section ID other than 0 is incompatible in a fabric of SilkWorm switches. Disconnect the
offending switch.
Severity
ERROR
FSPF-1006
Message
<timestamp>, [FSPF-1006], <sequence-number>,, ERROR, <system-name>,
FSPF Version <FSFP version> not supported, input port = <port
number>
Probable Indicates that the FSPF version is not supported on the specified input port.
Cause
Recommended Update the FSPF version by running the firmwareDownload command to update the firmware to the
Action
latest version. All current versions of the Fabric OS support FSPF version 2, which is the correct
version.
Severity
ERROR
22-2 Fabric OS Message Reference
Publication Number: 53-1000242-01