Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 375

PS System Messages
PS-1000
Message
<timestamp>, [PS-1000], <sequence-number>, FFDC, CRITICAL, <system-
name>, Failed to initialize Advanced Performance Monitoring.
Probable
Indicates that an unexpected software error has occurred in Advanced Performance Monitoring. The
Cause
Performance Monitor has failed to initialize.
Recommended
The CP should reboot (or fail over) automatically. If it does not, reboot or power cycle the switch to
Action reinitiate the firmware.
Severity
CRITICAL
PS-1001
Message
<timestamp>, [PS-1001], <sequence-number>,, INFO, <system-name>,
Advanced Performance Monitoring configuration updated due to change
in PID format
Probable Indicates that the PID format was changed.
Cause
Recommended No action is required. Refer to the Fabric OS Administrator's Guide for more information about the
Action
PID format.
Severity
INFO
PS-1002
Message
<timestamp>, [PS-1002], <sequence-number>,, INFO, <system-name>,
Failed to initialize the tracing system for Advanced Performance
Monitoring.
Fabric OS Message Reference
Publication Number: 53-1000242-01
Chapter
51
51-1