Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 388

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

Indicates that the SSL certificate file configured on the switch could not be accessed because root did

not have read-level access.

Change the file system access level for the certificate file to have root read-level access.

<timestamp>, [RPCD-1004], <sequence-number>,, WARNING, <system-

name>, Invalid certificate file. Secure RPCd is disabled.

Indicates that the SSL certificate file has been corrupted.

To enable RPCD in Secure mode, install a valid SSL certificate the switch.

<timestamp>, [RPCD-1005], <sequence-number>,, WARNING, <system-

name>, Missing private key file. Secure RPCd is disabled.

Indicates that the private key file is missing.

Run the pkiCreate command to install a valid private key file.

<timestamp>, [RPCD-1006], <sequence-number>,, WARNING, <system-

name>, Permission denied accessing private key file. Secure RPCd is

Indicates that the private key file configured on the switch could not be accessed because root did not

have read-level access.

Fabric OS Message Reference

Publication Number: 53-1000242-01