Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 203

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

<timestamp>, [FSS-1006], <sequence-number>,, WARNING, <system-

name>, No FSS message available

Indicates that data is not available on the FSS device.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

<timestamp>, [FSS-1007], <sequence-number>,, CRITICAL, <system-

name>, <component name>: BAD connection

Indicates that the Ethernet connection is not healthy.

Check the Ethernet connection and issue the haSyncStart command. If the problem persists, contact

your switch service provider.

Fabric OS Message Reference

Publication Number: 53-1000242-01