Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 224

25
FW-1127
FW-1127
Message
<timestamp>, [FW-1127], <sequence-number>,, INFO, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of segmentations has risen above the high boundary. Segmentation changes
Cause
might occur due to:
•
Zone conflicts.
•
Domain conflicts.
•
Segmentation of the principal link between two switches.
•
Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely,
incompatible parameters result in segmentation.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Severity
INFO
FW-1128
Message
<timestamp>, [FW-1128], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Indicates that the number of segmentations has changed from a value outside of the acceptable range to
Cause
a value within the acceptable range. Segmentation changes might occur due to:
•
Zone conflicts.
•
Domain conflicts.
•
Segmentation of the principal link between two switches.
•
Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely,
incompatible parameters result in segmentation.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation.
Severity INFO
25-18 Fabric OS Message Reference
Publication Number: 53-1000242-01