Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 550

79
SULB-1009
0x18 - Error in getting lock device for firmwaredownload. This error can occur because another
firmwareDownload is already in progress. Run firmwareDownloadStatus command to verify that is
the case. Wait until the current session to finish before proceeding.
0x23 - firmwareDownload timed out. This error can occur because firmwareDownload has not been
completed within the predefined timeout period. It is mostly caused by network issues. If the problem
persists, contact your system administrator.
0x24 - out of disk space. This error can occur because some coredump files have not been removed
from the filesystem and thus fill up the disk space. Remove these coredump files using the saveCore
command before proceeding.
0x29 - The pre-install script failed. This error can be caused by an unsupported blade type in the chassis.
Remove or power off the unsupported blades before proceeding. This can also be caused by an invalid
chassisConfig option setting. In that case, reset the chassisConfig option before retrying
firmwareDownload.
0x2e - Invalid RPM package. Please reload firmware packages on the file server. This error can be
caused by an inconsistent firmware image loaded on the file server. It can also be caused by temporary
networking issues. Retry the firmwareDownload. If the problem persists, contact your system
administrator.
Table 79-3
firmwareDownload process the error occurred.
Table 79-3
Upgrade State
SUS_PEER_CHECK_SANITY
SUS_PEER_FWDL_BEGIN
SUS_SBY_FWDL_BEGIN
SUS_PEER_REBOOT
SUS_SBY_REBOOT
SUS_SBY_FABOS_OK
SUS_PEER_FS_CHECK
SUS_SELF_FAILOVER
SUS_SBY_FWDL1_BEGIN
SUS_SELF_FWDL_BEGIN
SUS_SELF_COMMIT
SUS_SBY_FWC_BEGIN
SUS_SBY_COMMIT
SUS_SBY_FS_CHECK
SUS_ACT_FWC_BEGIN
SUS_PEER_RESTORE_BEGIN
SUS_SBY_RESTORE_BEGIN
79-8
lists the firmwareDownload state names and state values. They indicate where in the
Upgrade State and Code Value
Code
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x2a
0x2b
0x2c
0x2d
0x2e
0x2f
0x30
0x31
Publication Number: 53-1000242-01
Fabric OS Message Reference