Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 376

51
PS-1003
Probable
Indicates that an unexpected software error has occurred in Advanced Performance Monitoring. The
Cause
Performance Monitor tracing system has failed to initialize.
Recommended
Tracing will not be available for Advanced Performance Monitoring, but other functions should
Action function normally. To retry activating tracing, reboot (or fail over) the CP.
Severity
INFO
PS-1003
Message
<timestamp>, [PS-1003], <sequence-number>,, WARNING, <system-name>,
Failed to set end-to-end monitoring mask on ISL ports.
Probable
Indicates that the restoring configuration has attempted to set the end-to-end monitoring mask on at
Cause least one ISL port.
Recommended
No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is
Action enabled. ISL monitoring can only be disabled through the Fabric Access API.
Severity WARNING
PS-1004
Message
<timestamp>, [PS-1004], <sequence-number>,, WARNING, <system-name>,
Failed to add end-to-end monitors on port <port> which is an ISL
port.
Probable
Indicates that the restoring configuration has attempted to add end-to-end monitors on at least one ISL
Cause port.
Recommended
No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is
Action enabled. ISL monitoring can only be disabled through the Fabric Access API.
Severity WARNING
PS-1005
Message
<timestamp>, [PS-1005], <sequence-number>,, WARNING, <system-name>,
ISL monitor on port <port> stopped counting because no hardware
resources are available
Probable
Indicates that ISL and end-to-end monitors have used up all hardware resources.
Cause
51-2 Fabric OS Message Reference
Publication Number: 53-1000242-01