Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 416

58
SEC-1086
SEC-1086
Message
<timestamp>, [SEC-1086], <sequence-number>,, ERROR, <system-name>,
The security database is too large to fit in flash.
Probable Indicates that the security database has more data than the flash can accommodate.
Cause
Recommended Reduce the number of entries in some policies to decrease the security database size.
Action
Severity ERROR
SEC-1087
Message
<timestamp>, [SEC-1087], <sequence-number>,, ERROR, <system-name>,
The security database is larger than the data distribution limit of
fabric <fabric data distribution limit> bytes.
Probable Indicates that the security database has more data than can be distributed to some of the switches in the
Cause
fabric.
Recommended Reduce the number of entries in the security policies to decrease the security database size.
Action
Severity ERROR
SEC-1088
Message
<timestamp>, [SEC-1088], <sequence-number>,, ERROR, <system-name>,
Cannot execute the command. Please try later.
Probable
Indicates that there has been a corruption during the distribution of the security database. This can only
Cause
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity ERROR
58-22 Fabric OS Message Reference
Publication Number: 53-1000242-01