Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 353

Recommended
This message is often transitory.
Action
The fabric might be reconfiguring, forming, or merging. Wait a few minutes and try the operation again.
Run the fabricShow command or the secFabricShow command to verify that the number of domains
matches the Management Server known domains.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity INFO
MS-1005
Message
<timestamp>, [MS-1005], <sequence-number>,, ERROR, <system-name>,
MS Invalid CT Response from d=<domain>
Probable
Indicates that MS received an invalid common transport (CT) response from switch domain. MS
Cause
expects either a CT accept IU or a reject IU; MS received neither response, which violates the Fibre
Channel Generic Services (FS-GS) specification.
Recommended Check the integrity of the FC switch at the specified domain. It is not sending correct MS information as
Action defined by the FC-FS standard.
Severity ERROR
MS-1006
Message
<timestamp>, [MS-1006], <sequence-number>,, ERROR, <system-name>,
MS Unexpected iu_data_sz=<number of bytes>
Probable Indicates that MS received IU data of unexpected size. The IU payload and the IU size might be
Cause
inconsistent with each other or with the command that is currently being processed.
Recommended Wait a few minutes and try the operation again.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
ERROR
MS-1008
Message
<timestamp>, [MS-1008], <sequence-number>,, ERROR, <system-name>,
MS Failure while initializing <action>
Fabric OS Message Reference
Publication Number: 53-1000242-01
44
MS-1005
44-3