Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 210

25
FW-1009
FW-1009
Message
<timestamp>, [FW-1009], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable
Indicates that the state of the power supply has changed from faulty to functional, or from functional to
Cause
faulty.
Recommended
If the power supply is functioning correctly, no action is required.
Action
If the power supply is functioning below the acceptable boundary, verify that it is seated correctly in the
chassis. Run the psShow command to view the status of the power supply. If the power supply
continues to be a problem, replace the faulty power supply.
Severity INFO
FW-1010
Message
<timestamp>, [FW-1010], <sequence-number>,, WARNING, <system-name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable
Indicates that the power supply is faulty. The power supply is not producing enough power.
Cause
Recommended
Verify that you have installed the power supply correctly and that it is correctly seated in the chassis. If
Action the problem persists, replace the faulty power supply.
Severity
WARNING
FW-1011
Message
<timestamp>, [FW-1011], <sequence-number>,, INFO, <system-name>,
<Label>, is above high boundary(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
Probable Indicates that the power supply is functioning properly.
Cause
Recommended Set the high boundary above the normal operation range.
Action
25-4 Fabric OS Message Reference
Publication Number: 53-1000242-01