Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 360

46
NS-1003
NS-1003
Message
<timestamp>, [NS-1003], <sequence-number>,, INFO, <system-name>,
Number of local devices <Current local device count>, exceeds the
standby can support <Local device count that standby can support>,
can't send update.
Probable
Indicates that the name server on the standby CP has lower supported capability than the active CP due
Cause to different firmware versions running on the active and standby CPs. This means that the active and
standby CPs are out of sync. Any execution of the haFailover or firmwareDownload commands will
be disruptive.
Recommended
To avoid disruption of traffic in the event of an unplanned failover, schedule a firmwareDownload so
Action that the active and standby CPs have the same firmware version.
Reduce the local device count to follow the capability of the lowest version of firmware.
Severity
INFO
NS-1004
Message
<timestamp>, [NS-1004], <sequence-number>,, INFO, <system-name>,
Number of local devices <Current local device count>, exceeds the
standby can support <Local device count that standby can support>,
can't sync.
Probable
Indicates that the name server on the standby CP has lower supported capability than the active CP due
Cause to different firmware versions running on the active and standby CPs. This means that the active and
standby CPs are out of sync. Any execution of the haFailover or firmwareDownload commands will
be disruptive.
Recommended
To avoid disruption of traffic in the event of an unplanned failover, schedule a firmwareDownload so
Action that the active and standby CPs have the same firmware version.
Reduce the local device count to follow the capability of the lowest version of firmware.
Severity
INFO
46-2 Fabric OS Message Reference
Publication Number: 53-1000242-01