Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 176

Brocade fabric os message reference guide (53-1000242-01, november 2006)
Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:
Table of Contents

Advertisement

18
FCR-1024
Recommended
You might need to limit the number of port WWNs required by limiting the remote edge fabric
Action
connectivity (which limits the number of translate domains). You can also limit the number of proxy
devices for a translate domain (which limits the number of translate domain ports required) by limiting
the devices specified in LSAN zones.
Severity
WARNING
FCR-1024
Message
<timestamp>, [FCR-1024], <sequence-number>,, WARNING, <system-
name>, Local LSAN zone <zone name> device entries for edge LSAN
exhausted.
Probable
Indicates that the number of devices in an LSAN defined in the edge fabric is greater than allowed by
Cause
the local LSAN zone database limitations.
Recommended
Remove excess device entries from this LSAN zone until the number of devices is within the range of
Action
the local LSAN zone database limitations.
Severity
WARNING
FCR-1025
Message
<timestamp>, [FCR-1025], <sequence-number>,, WARNING, <system-
name>, Local phantom node WWN entries exhausted.
Probable
Indicates that the number of node WWNs detected to be in use is greater than the local node WWN
Cause
resources.
Recommended
You might need to limit the number of node WWNs required by limiting the remote edge fabric
Action
connectivity (which limits the number of translate domains).
Severity
WARNING
FCR-1026
Message
<timestamp>, [FCR-1026], <sequence-number>,, INFO, <system-name>,
Node WWN roll over.
Probable
Indicates that the node WWN pool has rolled over and WWN entries detected to not be in use are reused
Cause
as needed.
18-8
Fabric OS Message Reference
Publication Number: 53-1000242-01

Advertisement

Table of Contents
loading

Table of Contents