Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 296

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

<timestamp>, [HAMK-1003], <sequence-number>,, INFO, <system-name>,

Heartbeat up

Indicates that the active CP blade detects the standby CP blade. This message indicates that the standby

CP blade is available to take over in case a failure happens on the active CP blade. This message is

typically seen when the standby CP blade reboots.

No action is required. This message means that the standby CP is healthy.

<timestamp>, [HAMK-1004], <sequence-number>,, INFO, <system-name>,

Resetting standby CP (double reset may occur)

Indicates that the standby CP is being reset due to a loss of heartbeat. This message is typically seen

when the standby CP has been rebooted. Note that in certain circumstances a CP may experience a

double reset and reboot twice in a row. A CP can recover automatically even if it has rebooted twice.

No action is required.

Fabric OS Message Reference

Publication Number: 53-1000242-01