Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 463

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

SULB System Messages

<timestamp>, [SULB-1005], <sequence-number>,, INFO, <system-name>,

Current Active CP is preparing to failover.

Indicates that the active CP is about to reboot. The standby CP is taking over as the active CP.

No action is required. The firmwareDownload command is progressing as expected.

Run the firmwareDownloadStatus command for more information.

<timestamp>, [SULB-1006], <sequence-number>,, INFO, <system-name>,

Forced failover succeeded. New Active CP is running new firmware.

Indicates that the previous standby has now become the active CP and is running the new firmware

No action is required. The firmwareDownload command is progressing as expected.

Run the firmwareDownloadStatus command for more information.

<timestamp>, [SULB-1007], <sequence-number>,, INFO, <system-name>,

Standby CP reboots.

Fabric OS Message Reference

Publication Number: 53-1000242-01