Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 299

For the SilkWorm 3900, replace the motherboard FRU.
For the SilkWorm 4100, if the 12 volt level is faulty, replace one or both power supplies; if any other
voltage is faulty, replace the entire switch.
Severity
ERROR
HIL-1106
Message
<timestamp>, [HIL-1106], <sequence-number>,, ERROR, <system-name>,
Switch error, <nominal voltage> (<measured voltage>) below
threshold.
Probable Indicates that the switch voltage is below threshold. This message is specific to nonbladed switches and
Cause
is not applicable to the SilkWorm 12000, 24000, or 48000.
Recommended For the SilkWorm 200E, 3250 and 3850, the entire switch must be replaced, because these switches do
Action
not have FRUs.
For the SilkWorm 3900, replace the motherboard FRU.
For the SilkWorm 4100, if the 12 volt level is faulty, replace one or both power supplies; if any other
voltage is faulty, replace the entire switch.
Severity
ERROR
HIL-1107
Message
<timestamp>, [HIL-1107], <sequence-number>, FFDC, CRITICAL,
<system-name>, Switch faulted, <nominal voltage> (<measured
voltage>) above threshold. System preparing for reset.
Probable Indicates that the switch voltage is above threshold. This message is specific to nonbladed switches and
Cause
is not applicable to the SilkWorm 12000, 24000, or 48000.
Recommended For the SilkWorm 200E, 3250 and 3850, the entire switch must be replaced, because these switches do
Action
not have FRUs.
For the SilkWorm 3900, replace the motherboard FRU.
For the SilkWorm 4100, if the 12 volt level is faulty, replace one or both power supplies; if any other
voltage is faulty, replace the entire switch.
Severity CRITICAL
Fabric OS Message Reference
Publication Number: 53-1000242-01
28
HIL-1106
28-3