Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 155

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

If the message persists, run the firmwareDownload command to update the firmware.

<timestamp>, [FABS-1007], <sequence-number>,, WARNING, <system-

name>, <Function name>: Media state is invalid - status=<Status

Indicates that the Fabric OS has detected an invalid value in an object's status field. This is usually an

internal Fabric OS problem or file corruption.

Reboot or power cycle the switch.

If the message persists, run the firmwareDownload command to update the firmware.

<timestamp>, [FABS-1008], <sequence-number>,, WARNING, <system-

name>, <Function name>: Media oid mapping failed

Indicates that the Fabric OS was unable to locate a necessary object handle. This is usually an internal

Fabric OS problem or file corruption.

Reboot or power cycle the switch.

<timestamp>, [FABS-1009], <sequence-number>,, WARNING, <system-

name>, <Function name>: type is not media

Indicates that the Fabric OS was unable to locate an appropriate object handle. This is usually an

internal Fabric OS problem or file corruption.

Reboot or power cycle the switch.

Fabric OS Message Reference

Publication Number: 53-1000242-01