Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 464

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

Indicates that the standby CP is rebooting with new firmware.

No action is required. The firmwareDownload command is progressing as expected.

Run the firmwareDownloadStatus command for more information.

<timestamp>, [SULB-1008], <sequence-number>,, INFO, <system-name>,

Standby CP booted successfully with new firmware.

Indicates that the standby CP has rebooted successfully.

No action is required. The firmwareDownload command is progressing as expected.

Run the firmwareDownloadStatus command for more information.

<timestamp>, [SULB-1011], <sequence-number>,, INFO, <system-name>,

Firmwaredownload command failed. state: 0x<state code>, status:

0x<status code>.

Indicates that the firmwaredownload command failed. The additional state code indicates where in the

process it failed. Status code provides debugging information.

Run the firmwareDownloadStatus command for more information.

Refer to the Fabric OS Administrator's Guide for troubleshooting information.

<timestamp>, [SULB-1022], <sequence-number>,, WARNING, <system-

name>, The blade in slot <Slot number> has rebooted successfully

with new firmware.

Fabric OS Message Reference

Publication Number: 53-1000242-01