47
PDM-1010
Probable
Indicates that the PDM system call to setCfg failed.
Cause
Recommended
Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1010
Message
<timestamp>, [PDM-1010], <sequence-number>,, WARNING, <system-
name>, File open failed: <file name>
Probable
Indicates that the PDM process could not open the specified file name.
Cause
Recommended
Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1011
Message
<timestamp>, [PDM-1011], <sequence-number>,, WARNING, <system-
name>, File read failed: <file name>
Probable
Indicates that the PDM process could not read data from the specified file name.
Cause
Recommended
Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1012
Message
<timestamp>, [PDM-1012], <sequence-number>,, WARNING, <system-
name>, File write failed: <file name>
47-4
Fabric OS Message Reference
Publication Number: 53-1000242-01