Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 405

SEC-1044
Message
<timestamp>, [SEC-1044], <sequence-number>,, ERROR, <system-name>,
Duplicate member <member ID> in (<List>).
Probable Indicates that the specified member is a duplicate in the input list. The list can be a policy list or a switch
Cause
member list.
Recommended Do not specify any duplicates.
Action
Severity ERROR
SEC-1045
Message
<timestamp>, [SEC-1045], <sequence-number>,, ERROR, <system-name>,
Too many port members.
Probable
Indicates that there has been a corruption during the distribution of the security database. This can only
Cause
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity
ERROR
SEC-1046
Message
<timestamp>, [SEC-1046], <sequence-number>,, ERROR, <system-name>,
Empty list.
Probable
Indicates that there has been a corruption during the distribution of the security database. This can only
Cause
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity
ERROR
Fabric OS Message Reference
Publication Number: 53-1000242-01
58
SEC-1044
58-11