Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 145

Probable
Indicates that the errors occurred while cleaning up the RDI (request domain ID). The error description
Cause
provides further details. This message is rare and usually indicates a problem with the Fabric OS.
Recommended
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
Action supportSave command and contact your switch service provider.
Severity
WARNING
FABR-1011
Message
<timestamp>, [FABR-1011], <sequence-number>, FFDC, ERROR, <system-
name>, <error description>
Probable Indicates that the Fabric OS is unable to inform the FSSME (Fabric OS State Synchronization
Cause Management module) that the fabric is stable or unstable. This message is rare and usually indicates a
problem with the Fabric OS.
Recommended
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
Action
supportSave command and contact your switch service provider.
Severity
ERROR
FABR-1012
Message
<timestamp>, [FABR-1012], <sequence-number>,, WARNING, <system-
name>, <function stream>: no such type, <invalid type>
Probable
Indicates that the fabric is not in the appropriate state for the specified process. This message is rare and
Cause usually indicates a problem with the Fabric OS.
Recommended
The fabric daemon will take proper action to recover from the error.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING
FABR-1013
Message
<timestamp>, [FABR-1013], <sequence-number>, FFDC, CRITICAL,
<system-name>, No Memory: pid=<fabric process id> file=<source file
name> line=<line number within the source file>
Fabric OS Message Reference
Publication Number: 53-1000242-01
11
FABR-1011
11-5