Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 231

Brocade fabric os message reference guide (53-1000242-01, november 2006)
Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:
Table of Contents

Advertisement

FW-1165
Message
<timestamp>, [FW-1165], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is below low boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of synchronization losses that the port experiences has fallen below the low
Cause
boundary. Loss of synchronization errors frequently occur due to a faulty SFP or cable. Signal losses
often create synchronization losses.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action
installation. A low number of synchronization losses means that the switch is functioning normally.
Severity
INFO
FW-1166
Message
<timestamp>, [FW-1166], <sequence-number>,, WARNING, <system-name>,
<Port Name>, <Label>, is above high boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of synchronization losses that the port experiences has risen above the high
Cause
boundary. Loss-of-synchronization errors frequently occur due to a faulty SFP or cable. Signal losses
often create synchronization losses.
Recommended
Check both ends of your cable connection. Verify that the cable and SFPs are not faulty.
Action
If you continue to experience loss-of-synchronization errors, troubleshoot your HBA and contact your
switch service provider.
Severity
WARNING
FW-1167
Message
<timestamp>, [FW-1167], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is between high and low boundaries(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of synchronization losses that the port experiences has changed from a value
Cause
outside of the acceptable range to a value within the acceptable range. Loss of synchronization errors
frequently occur due to a faulty SFP or cable. Signal losses often create synchronization losses.
Fabric OS Message Reference
Publication Number: 53-1000242-01
25
FW-1165
25-25

Advertisement

Table of Contents
loading

Table of Contents