Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 174

18
FCR-1018
FCR-1018
Message
<timestamp>, [FCR-1018], <sequence-number>,, ERROR, <system-name>,
FC router proxy device entries exhausted on port <port number>.
Probable Indicates that the number of proxy devices is greater than allowed by the port resource.
Cause
Recommended
Remove excess LSAN zones or devices until the number of proxy devices exported is within the range
Action
allowed by the port resource. Use the fcrResourceShow command to view resources including LSAN
zone resources, LSAN device resources, and proxy device port resources.
Use the fcrProxyDevShow command to view how many proxy devices are created in the fabric with
the port resource problem.
LSAN zones are removed using standard zoning commands such as zoneShow, zoneRemove,
zoneDelete, cfgDelete, and cfgDisable in the edge fabric. Proxy devices can be removed by zoning
operations or by bringing physical devices offline. For example, disabling the port that a device is
attached to, and then disconnecting the cable or disabling the device.
Severity
ERROR
FCR-1019
Message
<timestamp>, [FCR-1019], <sequence-number>,, ERROR, <system-name>,
EX or VEX port entries exhausted at port <port number>.
Probable
Indicates that the number of EX or VEX port entries being created is greater than allowed by the port
Cause resource.
Recommended
Disable EX or VEX ports until the number of ports is within the range allowed by the port resource. The
Action EX or VEX port limit is displayed using the fcrRouteShow command. Use the portDisable command
to disable EX ports.
Severity ERROR
FCR-1020
Message
<timestamp>, [FCR-1020], <sequence-number>,, WARNING, <system-
name>, Local LSAN zone entries for FC router exhausted; max limit:
<LSAN zone limit>.
Probable Indicates that the number of LSAN zones created within a MetaSAN is greater than the local LSAN
Cause
zone database limitations.
18-6 Fabric OS Message Reference
Publication Number: 53-1000242-01