Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 491

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

UCST System Messages

<timestamp>, [UCST-1003], <sequence-number>,, INFO, <system-name>,

Duplicate Path to Domain <domain ID>, Output Port = <port number>,

PDB pointer = 0x<value>

Indicates that duplicate paths were reported to the specified domain from the specified output port. The

path database (PDB) pointer is the address of the path database and provides debugging information.

No action is required.

<timestamp>, [UCST-1007], <sequence-number>, FFDC, CRITICAL,

<system-name>, Inconsistent route detected: Port = <port number>,

should be <port number>

Indicates that the switch detected an inconsistency in the routing database between the routing protocol

and the hardware configuration. The first port number displayed is what the hardware has configured

and the second port number displayed is what the protocol is using.

Run the switchDisable command and then the switchEnable command to reset the routing database.

Run the uRouteShow command to display the new routing tables.

Fabric OS Message Reference

Publication Number: 53-1000242-01