Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 236

25
FW-1179
FW-1179
Message
<timestamp>, [FW-1179], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is between high and low boundaries(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of invalid words that the port experiences has changed from a value outside of
Cause
the acceptable range to a value within the acceptable range. Invalid words usually indicate a hardware
problem with an SFP or cable.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Severity INFO
FW-1180
Message
<timestamp>, [FW-1180], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, value has changed(High=<High value>, Low=<Low
value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of invalid CRCs that the port experiences has changed.
Cause
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation. Frequent fluctuations in CRC errors generally indicate an aging fabric. Check your SFPs,
cables, and connections for faulty hardware. Verify that all optical hardware is clean.
Severity INFO
FW-1181
Message
<timestamp>, [FW-1181], <sequence-number>,, INFO, <system-name>,
<Port Name>, <Label>, is below low boundary(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of invalid CRCs that the port experiences has fallen below the low boundary.
Cause
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation. A low number of invalid CRCs means that the switch is functioning normally.
Severity
INFO
25-30 Fabric OS Message Reference
Publication Number: 53-1000242-01