Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 433

Recommended
Enter a valid name.
Action
Severity
INFO
SEC-1159
Message
<timestamp>, [SEC-1159], <sequence-number>,, INFO, <system-name>,
Non_Reachable domain <Domain ID>.
Probable
Indicates that there has been a corruption during the distribution of the security database. This can only
Cause occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity
INFO
SEC-1160
Message
<timestamp>, [SEC-1160], <sequence-number>,, INFO, <system-name>,
Duplicate port <port ID> in port list (<port list>).
Probable Indicates that duplicate port member exists in the given portlist.
Cause
Recommended Verify that there is no duplicate port member in the portlist.
Action
Severity INFO
SEC-1163
Message
<timestamp>, [SEC-1163], <sequence-number>,, ERROR, <system-name>,
System is already in secure mode. Lockdown option cannot be applied.
Probable Indicates that the lockdown option was attempted while the fabric is already in secure mode.
Cause
Recommended Do not use the lockdown option with the secModeEnable command when switch is already in secure
Action
mode.
Fabric OS Message Reference
Publication Number: 53-1000242-01
58
SEC-1159
58-39