Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 365

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

Indicates that the PDM process could not write data to the specified file name.

Run the firmwareDownload command to reinstall the firmware.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

<timestamp>, [PDM-1013], <sequence-number>,, WARNING, <system-

name>, File empty: <File Name>

Indicates that the switch configuration file /etc/fabos/fabos.[0|1].conf is empty.

Run the firmwareDownload command to reinstall the firmware.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

<timestamp>, [PDM-1014], <sequence-number>,, WARNING, <system-

name>, Access sysmod failed

Indicates that a system call failed.

Run the firmwareDownload command to reinstall the firmware.

If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the

supportSave command and contact your switch service provider.

<timestamp>, [PDM-1017], <sequence-number>, FFDC, CRITICAL,

<system-name>, System (<Error Code>): <Command>

Fabric OS Message Reference

Publication Number: 53-1000242-01