Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 435

SEC-1167
Message
<timestamp>, [SEC-1167], <sequence-number>,, ERROR, <system-name>,
Another FCS failover is in process. Command terminated.
Probable Indicates that because another failover is already in progress, this failover attempt cannot proceed.
Cause
Recommended Verify that the security event was planned. If the security event was planned, retry FCS failover after
Action
current failover has completed, if this switch should become primary FCS. If the security event was not
planned, take appropriate action as defined by your enterprise security policy.
Severity
ERROR
SEC-1168
Message
<timestamp>, [SEC-1168], <sequence-number>,, ERROR, <system-name>,
Primary FCS failover is busy. Please retry later.
Probable
Indicates that there has been a corruption during the distribution of the security database. This can only
Cause occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity
ERROR
SEC-1170
Message
<timestamp>, [SEC-1170], <sequence-number>,, INFO, <system-name>,
This command must be executed on the Primary FCS switch, the first
reachable switch in the FCS list.
Probable Indicates that there has been a corruption during the distribution of the security database. This can only
Cause
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Fabric OS Message Reference
Publication Number: 53-1000242-01
58
SEC-1167
58-41