Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 264

Brocade fabric os message reference guide (53-1000242-01, november 2006)
Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:
Table of Contents

Advertisement

25
FW-1335
Probable
Indicates that the number of SCC violations has risen above the high boundary. SCC violations indicate
Cause
that an unauthorized switch tried to join the fabric. The SCC_POLICY contains a list of switches by
WWN that are allowed to be members of a fabric.
Recommended
Run the errShow command to determine the WWN of the device that sent the request. Responses to
Action
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity
WARNING
FW-1335
Message
<timestamp>, [FW-1335], <sequence-number>,, INFO, <system-name>,
<Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable
Indicates that the number of SCC violations has changed from a value outside of the acceptable range to
Cause
a value within the acceptable range. SCC violations indicate that an unauthorized switch tried to join the
fabric. The SCC_POLICY contains a list of switches by WWN that are allowed to be members of a
fabric.
Recommended
No action is required.
Action
Severity
INFO
FW-1336
Message
<timestamp>, [FW-1336], <sequence-number>,, INFO, <system-name>,
<Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable
Indicates that the number of DCC violations has changed. DCC violations indicate that an unauthorized
Cause
device tried to join the fabric. The DCC_POLICY allows for the specification of rules for binding
device ports (typically HBA ports) to specific switch ports. DCC policies ensure that whenever a device
performs an FLOGI request, the WWN specified in the FLOGI is validated to be connected to the
authorized port. Enforcement for private loop devices not performing FLOGI is done through the name
server.
Recommended
Run the errShow command to determine the device WWN, switch WWN, and switch port. Responses
Action
to security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity
INFO
25-58
Fabric OS Message Reference
Publication Number: 53-1000242-01

Advertisement

Table of Contents
loading

Table of Contents