Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 288

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

<timestamp>, [FW-1438], <sequence-number>,, WARNING, <system-name>,

Switch status change contributing factor Missing SFPs: <Num of

missing SFPs> missing SFPs.

Indicates that the switch status is not in a healthy state. This occurred because the number of missing

SFPs is greater than or equal to the policy set by the switchStatusPolicySet command.

Run the switchStatusPolicySet command to modify the SFP policy or to add SFPs to the empty ports.

<timestamp>, [FW-1439], <sequence-number>,, WARNING, <system-name>,

Switch status change contributing factor Switch offline.

Indicates that the switch status is not in a healthy state. This occurred because the switch is offline.

Run the switchEnable command.

<timestamp>, [FW-1440], <sequence-number>,, INFO, <system-name>,

<FRU label> state has changed to <FRU state>.

Indicates that the specified FRU's state has changed to "absent".

No action is required. Verify that the event was planned.

Fabric OS Message Reference

Publication Number: 53-1000242-01