Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 115

Brocade fabric os message reference guide (53-1000242-01, november 2006)

Hide thumbs Also See for AA979A - StorageWorks SAN Switch 2/8V:

Table of Contents

CDR System Messages

<timestamp>, [CDR-1001], <sequence-number>,, ERROR, <system-name>,

Port <port number> port fault. Please change the SFP or check cable

Indicates a deteriorated SFP, an incompatible SFP pair, a faulty cable between peer ports, or the port

speed configuration does not match the capability of the SFP.

Verify that you are using compatible SFPs on the peer ports.

Verify that the SFPs have not deteriorated and that the Fibre Channel cable is not faulty. Replace the

SFPs or cable if necessary. If there is a speed configuration mismatch, replace the SFP with a

compatible one or change the configuration.

<timestamp>, [CDR-1002], <sequence-number>, FFDC, ERROR, <system-

name>, Port <port number> chip faulted due to internal error.

Internal error. All the ports on the blade or switch will be disrupted.

For a bladed system, issue the slotPowerOff and slotPowerOn commands on the blade to recover the

system. For a non-bladed system, perform fastBoot on the switch to recover the system.

Fabric OS Message Reference

Publication Number: 53-1000242-01