Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 316

29
HLO-1003
HLO-1003
Message
<timestamp>, [HLO-1003], <sequence-number>,, ERROR, <system-name>,
Invalid Hello received from port <port number>, Domain = <domain
ID>, Remote Port = <remote port ID>
Probable
Indicates that the HLO message received was invalid and the frame was dropped. The Brocade switch
Cause
will not accept FSPF frames from the remote switch.
The switch has received an invalid HLO because either the domain or port number in the HLO message
has an invalid value. This error can only occur when the Brocade switch is connected to a switch from
another manufacturer.
Recommended
The HLO message of the remote switch must be compatible with the value specified in the FSPF
Action
protocol. Refer to documentation of the other manufacturer's switch to change this value.
Severity
ERROR
29-2 Fabric OS Message Reference
Publication Number: 53-1000242-01