Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 515

ZONE-1040
Message
<timestamp>, [ZONE-1040], <sequence-number>,, INFO, <system-name>,
Merged zone database exceeds limit.
Probable Indicates that the Fabric OS cannot read the merged zone configuration file. Typically the zone
Cause
configuration is too large for the memory available on the switch.
Recommended Reduce the size of the zone database and retry the operation.
Action
Severity INFO
ZONE-1041
Message
<timestamp>, [ZONE-1041], <sequence-number>,, WARNING, <system-
name>, Unstable link detected during merge at port (<Port number>).
Probable
Indicates a possible unstable link or faulty cable.
Cause
Recommended
Check the SFP and cable at the specified port and verify that they are not faulty. Replace the SFP and
Action cable as necessary.
Severity
WARNING
ZONE-1042
Message
<timestamp>, [ZONE-1042], <sequence-number>,, INFO, <system-name>,
The effective configuration has been disabled. <AD Id>
Probable Indicates that the effective zone configuration has been disabled.
Cause
Recommended Verify that this zone configuration change was done on purpose. If no effective zone configuration is
Action
needed, no action is necessary.
Severity INFO
Fabric OS Message Reference
Publication Number: 53-1000242-01
73
ZONE-1040
73-13