Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 430

58
SEC-1145
Probable
Indicates that the new polices are rejected due to the reason specified.
Cause
Recommended
Use proper syntax when entering policy information.
Action
Severity
INFO
SEC-1145
Message
<timestamp>, [SEC-1145], <sequence-number>,, INFO, <system-name>, A
security admin event has occurred. This message is for information
purpose only. The message for individual event is: <Event specific
data>
Probable
Indicates one of the following has occurred:
Cause
•
The names for the specified policies have changed.
•
The passwords have changed for the specified accounts.
•
The SNMP community strings have been changed.
Recommended Verify that the security event was planned. If the security event was planned, no action is required. If the
Action
security event was not planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
SEC-1146
Message
<timestamp>, [SEC-1146], <sequence-number>,, INFO, <system-name>,
PID changed: <State>.
Probable
Indicates that the PID format of the switch was changed either to extended-edge PID or from extended-
Cause
edge PID. If the DCC polices existed, all index/area ID values either increased or decreased by 16. The
values wrap around after 128. If a DCC policy contains an index/area of 127 before changing to
extended-edge PID, then the new index/area is 15, because of the wraparound.
Recommended No action is required.
Action
Severity
INFO
58-36 Fabric OS Message Reference
Publication Number: 53-1000242-01