Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 443

Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action
in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity WARNING
SEC-1195
Message
<timestamp>, [SEC-1195], <sequence-number>,, WARNING, <system-
name>, This switch has no <component> license.
Probable Indicates that there has been a corruption during the distribution of the security database. This can only
Cause
occur when the primary FCS is distributing the security database to the other switches in the fabric and
local validation finds that there is an error in the security database. This is a rare occurrence.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be
Action in the ready state. If a switch is in the error state, the database might not be correctly updated for that
specific switch.
Severity WARNING
SEC-1196
Message
<timestamp>, [SEC-1196], <sequence-number>,, WARNING, <system-
name>, Switch does not have all default account names.
Probable Indicates that the default switch accounts admin and user do not exist on the switch when enabling
Cause
security.
Recommended
Reset the default admin and user account names on the switch that reported the warning and retry
Action
enabling security.
Severity
WARNING
SEC-1197
Message
<timestamp>, [SEC-1197], <sequence-number>,, INFO, <system-name>,
Changed account <user name>.
Probable
Indicates that the specified account has changed.
Cause
Fabric OS Message Reference
Publication Number: 53-1000242-01
58
SEC-1195
58-49