Brocade Communications Systems AA979A - StorageWorks SAN Switch 2/8V Reference Manual page 146

11
FABR-1014
Probable
Indicates that there is not enough memory in the switch for the fabric module to allocate. This message
Cause
is rare and usually indicates a problem with the Fabric OS.
Recommended
The system will recover by failing over to the standby CP.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
CRITICAL
FABR-1014
Message
<timestamp>, [FABR-1014], <sequence-number>, FFDC, ERROR, <system-
name>, Port <port number> Disabled: Insistent Domain ID <Domain ID>
could not be obtained. Principal Assigned Domain ID = <Domain ID>
Probable Indicates that the specified port received an RDI (request domain ID) accept message containing a
Cause
principal-switch-assigned domain ID that is different from the insistent domain ID (IDID). FICON
mode requires an insistent domain ID. If an RDI response has a different domain ID, then the port is
disabled.
Recommended Run the configShow command to view the fabric.ididmode. A 0 means the IDID mode is disabled; a 1
Action
means it is enabled.
Set the switch to insistent domain ID mode. This mode is set under the configure command or in Web
Tools on the Switch Admin > configure window.
Severity
ERROR
FABR-1015
Message
<timestamp>, [FABR-1015], <sequence-number>, FFDC, ERROR, <system-
name>, FICON Insistent DID max retry exceeded: All E-Ports will be
disabled. Switch is isolated.
Probable Indicates that the application exceeded RDI (request domain ID) requests for the insistent domain ID.
Cause
All E_Ports are disabled, isolating the specified switch from the fabric.
Recommended Verify that the insistent domain ID is unique in the fabric and then reenable the E_Ports. Run the
Action
fabricShow command to view the domain IDs across the fabric and the configure command to change
the insistent domain ID mode. Refer to the Fabric OS Command Reference for more information on
these commands.
Severity ERROR
11-6 Fabric OS Message Reference
Publication Number: 53-1000242-01